Ericsson W25 Betriebsanweisung PDF herunterladen (Seite 69)

PC Configuration

5 PC Configuration

The connection to the Ericsson W25 may require specific PC configuration.

This chapter includes instructions on how to configure Internet Protocol (IP)

settings as well as establish wireless connection(s) with the Ericsson W25.

The descriptions include examples from Windows XP and 2000. If you use

another operating system, please refer to the system documentation or

online help.

5.1 IP Settings

The Ericsson W25 automatically assigns the IP settings to your PC(s). You

only need to configure the PC(s) according to the instructions below to

accept the information. In some cases however, you may want to configure

IP settings manually. See section

– Configuring Static IP Address. 5.1.2

If you have connected your LAN PC(s) to the Ericsson W25, follow the

instructions that correspond to the operating system installed on your PC in

the following sub-sections.

If you want to allow wireless PCs to access your device, you also have to

follow the instructions in section

5.2 – Wireless LAN Settings.

5.1.1 Obtain IP Settings Automatically

Follow the instructions that correspond to the operating system installed on

your PC.

5.1.1.1 Windows XP

1. In the Windows task bar, click the Start button, and then click Control

Panel. The Control Panel window is displayed.

2. If you are using Category View, Click

Network and Internet

Connections

and then Network Connections. If you are using

Classic View, double-click Network Connections. The

Network

Connections

window is displayed.

3. Double-click the icon corresponding to your network interface card

(NIC). This icon is usually labeled

Local Area Connection. The Local

Area Connection Properties

window is displayed with a list of

currently installed network items.

5/1551-CRH 102 167 Uen Rev F 2008-07-09

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 93 94

Keine Kommentare

Ericsson W25 Betriebsanweisung Seite 69