Ericsson RX8000 Series Betriebsanweisung PDF herunterladen (Seite 17)

RX8200 Advanced Modular Receiver

!Select SAT input

Set the LNB frequency

Set the Satellite frequency

Set the Symbol Rate

Set the Modulation scheme and FEC

Set the Roll-Off

Set the set the LNB power output

Set the set the LNB power output level

A description of each of these User Settings can be found in the Reference Guide.

NOTE

If the unit has successfully locked to the incoming feed, then the TS

Lock value in menu 2 should be LOCKED.

5.3 Selecting a Decode Service (Program)

Navigate to the Service Selection menu (Menu 3).

!For incoming feeds containing only a single service the service will be

selected automatically

!For incoming feeds containing more than one service press Edit and, using

the Up and Down pushbuttons, scroll through the service name list. Then

press Save to select the required service.

!Alternatively, use the Right pushbutton to move the cursor to the service ID

field and press Edit. Enter the required service ID using the Up and Down

pushbuttons for each digit of the service ID.

NOTE

If the unit has successfully selected a service, then menu 3 should

display the Service ID and Service name.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

Keine Kommentare

Ericsson RX8000 Series Betriebsanweisung Seite 17