
Basic Configuration
4/1553-HSC 901 101/2 Uen B 2009-02-27
35
• Quality of Service is enabled. Priority barrier is set to 5, which means
that all traffic with a priority equal or higher then 5 will be put in the high
priority queue.
• IGMP snooping is enabled.
• Bandwidth Threshold is set to 99%, which means that if the bandwidth
on any port is higher than 99% of maximum supported bandwidth an
alarm will be issued.
• Flow control is disabled on all ports.
• Duplex mode is Auto negotiation.
• Port based VLAN is set to enable traffic flow from uplink to any
downlink port and from downlink ports only to uplink port. This implies
that it is not possible to communicate between the downlink ports by
default. Port 9 (the optical port) and port 8 are configured as possible
uplink ports. Table 6 on page 35 illustrates the factory default settings.
“1” denotes true (the ports may communicate directly) and “2” denotes
false.
Table 6 Traffic Forwarding Table
Ingress
Egress
1
(FE1)
2
(FE2)
3
(FE3)
4
(FE4)
5
(FE5)
6
(FE6)
7
(FE7)
8
(FE8)
9
(Optical)
1
(FE1)
2 2 2 2 2 2 2 1 1
2
(FE2)
2 2 2 2 2 2 2 1 1
3
(FE3)
2 2 2 2 2 2 2 1 1
4
(FE4)
2 2 2 2 2 2 2 1 1
5
(FE5)
2 2 2 2 2 2 2 1 1
6
(FE6)
2 2 2 2 2 2 2 1 1
7
(FE7)
2 2 2 2 2 2 2 1 1
8
(FE8)
1 1 1 1 1 1 1 2 1
9
(Optical)
1 1 1 1 1 1 1 1 2
Kommentare zu diesen Handbüchern