Ericsson LBI-39001 Bedienungsanleitung PDF herunterladen (Seite 6)

To Call:

•

An individual radio, enter the 5-digit radio LID.

•

A digital individual radio, press “3” + 5-digit radio LID.

•

A group of radios, press “2” + 4-digit GID.

•

A digital group of radios, press “3” + “2” + 4-digit GID.

Example 1: To call radio 6107

•

Dial the EDACS telephone number.

•

At the dial tone, enter the EDACS selector (optional).

•

Enter “0” + “6” + “1” + “0” + “7” (Remember the LID must be 5

digits, i.e. 06107).

Example 2: To call group 372

•

Dial the EDACS telephone number.

•

At the dial tone, enter the EDACS selector (optional).

•

Enter “2” + “0” + “3” +”7” + “2” (Remember the GID must be 4

digits , i.e. 0372).

Some systems will be set up using feature and authorization codes that

are a variable number of digits. (Contact your System Administrator for

more information.) The authorization code must be entered before the

EDACS selector and before the digits specifying call type and radio ID.

Example 3: This is the same call to group 372 as described in Example

2 except that the authorization code “*6*123#” is required and the

EDACS selector is “7”.

•

Dial the EDACS telephone number.

•

At the dial tone, enter the authorization code “*” + “6”

+ “*” + “1” +

“2” + “3” + “#”.

•

Enter the EDACS selector (“7”).

•

Enter “2” + “0” + “3” + “7” + “2”.

Ending a call

Simply hang up the phone.

3. DETAILED USAGE GUIDE

The Jessica system contains a small business telephone switch that

allows flexible use of telephones and radios. The sections below present

instructions on how to use a telephone or a radio to complete several types

of tasks with Jessica and how to activate those features that may be enabled

from a radio.

3.1. PHONE USERS

The following chart shows how to access Jessica features from a

telephone.

Task

Accomplishing Task with Jessica

Placing a phone-originated

call

1. The PSTN user must dial into the

MD110 via a customer-defined public

number. Once the MD110 answers, it

generates a second dial tone.

Note: Normally, a user skips to step 4,

but steps 2 and 3 may be used to obtain

more phone privileges where allowed.

2. At the second dial tone, the PSTN user

enters the following command sequence:

"*" + FC + "*" + AC + "#'"

FC is the MD110 feature code indicating

that an authorization code (AC) follows.

This feature code is market-dependent

and is typically a single digit. For

example, a "6" is used as the FC in the

U.S.

AC is the authorization code defined for

the caller. The AC is customer-defined

and may be from 1 to 7 digits, but cannot

begin with "0."

1 2 3 4 5 6 7 8 9 10 11 12

Kommentare zu diesen Handbüchern

Keine Kommentare

Ericsson LBI-39001 Bedienungsanleitung Seite 6

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Ericsson LBI-39001