
• Issue #3132 and 3151: Phone rings twice……
Symptom/Change: Re-enabling the call suspend/resume timers
upon hook events. Note: This also requires the new firmware in
the Radio module, see R4B001.
• Issue #3073: Block password login via SSH
Symptom/change: It’s now possible to block password login via
SSH. Set parameter ssh.password_authentication = false, then
it’s not possible to login with password, only with correct key.
• Issue #3168: Incorrect dialtone
Symptom/change: The error was due to a non-working tone
modulation.
• Issue #3094: SIM lock doesn’t stop data connection
Symptom/change: Data connection is now block if the SIM card’s
PLMN doesn’t match the correct MCC and MNC (PLMN).
• Issue #3181: Emergency number not correctly handled
Symptom/change:
- 112 and 009 are always available
- If SIM is present emergency numbers from the dialplan are also
used.
- If no SIM is present 000, 08, 110, 999, 118 and 119 are also
handled as emergency numbers.
• Issue #3203: Disabling WLAN Causes Server 500 Error
Symptom/change: Disabling WLAN doesn’t cause the web server
error
• Issue #3070: No progress indication during upgrade.
Symptom/change: No progress indication during upgrade of
Radio module, which takes several minutes.
• Issue #3121: The internet led doesn't show the correct
status.
Symptom/change: The Internet LED didn’t always show correct
status
• Issue #3118: Tone timeout is incorrect
Symptom/Change: It is possible to set timeouts for congestion
and howler, so enable the sequence; dial_tone_timeout ->
congestion_tone_timeout -> howler_tone_timeout . Timeout set
to -1 means infinite time.
• Issue #2921, CQI value is missing
Symptom/change: CQI value is not displayed when issuing the
command "st wan". Please not that the CQI value is only
available when in HSDPA mode.
• Issue #2712 Improve 'cf show' output to be more human-
readable"
Symptom/change: Now it’s more inline with “set” command
28 31/109 47-CRH 102 167 Uen A – Oct 2008
Kommentare zu diesen Handbüchern