Ericsson W25 Betriebsanweisung PDF herunterladen (Seite 42)

Configuration and Management

Authentication Select an authentication method from the list.

Note: Make sure that the operating system(s) and Wireless LAN

interface(s) of the wireless client(s) support the selected

authentication method.

If you have selected WEP (64 bit) or WEP (128 bit), type the key for

encryption in the

Passphrase / Key field. A 64-bit data encryption key

includes 10 characters. A 128-bit data encryption key includes 26

characters. Only the hexadecimal numbers 0 to 9 and letters A to F are

allowed.

If you have selected WPA or WPA2, type the passphrase for authentication

and encryption in the

Passphrase / Key field. A WPA or WPA2 passphrase

is case sensitive and consists of between 8 and 63 optional characters. For

security reasons, you are recommended to use a passphrase that contains

at least 20 characters. The passphrase is case sensitive.

Click Apply to save the settings.

4.6.1 Connected Devices

The Connected Devices list includes the MAC (Media Access Control)

addresses of all wireless devices currently connected to the Ericsson W25.

To find out about the MAC address of a PC using Microsoft Windows, open

a command prompt and type

ipconfig /all. A list of system properties

is displayed. The MAC address is found on the

Physical Address row.

4.6.2 Whitelist

The Whitelist is a list of up to 20 WLAN client MAC addresses that are

allowed to access the Ericsson W25. A MAC address is the unique

hardware number of a device. It has the form of xx:xx:xx:xx:xx:xx, where x

is a hexadecimal number 0 to 9 or letter A to F.

To add a client to the whitelist, copy a MAC address from the

Connected

Devices

Whitelist list or type the client’s MAC address in the field on the

Wireless LAN page and click Add . Click Apply to save the settings.

36 5/1551-CRH 102 167 Uen Rev B 2007-02-01

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 72 73

Keine Kommentare

Ericsson W25 Betriebsanweisung Seite 42