Ericsson RX8000 Series Spezifikationen PDF herunterladen (Seite 27)

Appendix

RX8200 Configuration Guide

APPENDIX 3 MANUAL CONFIGURATION OF THE RX8200 TO LOCK TO RLS

AND WNE.

The screen shot examples below show a different default management IP address. Ensure you are using a

172.16.2.20 IP address for Control 2 management interface.

Note: The following screen shots may not be identical to the RX8200 unit at hand as different firmware versions of

the unit have additional menu options.

1. Configuration of the RLS Service paramaters must be configured first. Select the Input tab on the RX8200

browser interface.

Figure 38 Satellite Input

2. Select the Satellite Input tab at the bottom of the browser page.You will now see a list of the L-band inputs.

The RF signal from the satellite dish should be connected to Input 1 as shown in section 2.2 of this

document.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 36 37

Keine Kommentare

Ericsson RX8000 Series Spezifikationen Seite 27