Ericsson RX8000 Series Spezifikationen PDF herunterladen (Seite 7)

Receiver Installation and Cable Connections

RX8200 Configuration Guide

2.3 IP DATA AND MANAGEMENT CONNECTION

Connect the Ethernet 3 (eth3) network card of the WNE HPDL180 G6 server to the RX8200 (labelled IP OUT 2)

using an ethernet cable for WNE IP Data.

Connect the Ethernet 1 (eth1) network card on the server to the management port (labelled CONTROL 2) on the

RX8200 for management access. Figure 2 shows how these connections should be made between both devices.

NIC interfaces should be auto-sensing, hence a standard straight ethernet cable is sufficient for a direct connection.

Figure 5. Network Cabling Connection Convention

2.4 MANAGEMENT ADDRESS CONFIGURATION

Default IP Address - 172.16.2.20

Configuration of this IP address must be configured on the front panel of the receiver. When this address change

is applied, the WNE Server can be used to access the RX8200 browser page to complete the receiver

configuration settings.

1 2 3 4 5 6 7 8 9 10 11 12 ... 36 37

Keine Kommentare

Ericsson RX8000 Series Spezifikationen Seite 7