Ericsson RX1290 Betriebsanweisung PDF herunterladen (Seite 44)

Operating the Equipment Locally

Page 3-8 Reference Guide: RX1290 H.264 Contribution Receiver

ST.RE.E10228.1

3.6.2 Telco Receiver - TTV G.703

Table 3.7 steps through the set up procedure of the Telco Receiver using

Menu 2 Input, and the TTV G.703 input.

Table 3.7: Setting Up the TTV G.703 Interface

Step Action Result

1 Connect the cable to the TTV G.703 input.

2 Power up the unit and navigate to Menu 2

Input.

Accesses the Input menu.

3 Press the Right pushbutton to access Menu

2.3.

Selects the G.703 menu.

4 Navigate to INTERLEAVER (Menu 2.3.3),

then press Edit.

Select Enable or Disable, then press Save.

Sets the required interleaving.

5 Navigate to SIGNAL LEVEL (Menu 2.3.4),

then press Edit.

Select Normal or Low, then press Save.

Sets the unit sensitivity to the input signal level.

6 Navigate to REED-SOLOMON (Menu 2.3.2),

then press Edit.

Select ENABLE, then press Save.

Enables FEC functionality.

7 Return to Input Menu 2, it should display the

current status. If status is NOT LOCKED,

verify that the cable is properly connected and

that all values have been entered correctly.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 135 136

Keine Kommentare

Ericsson RX1290 Betriebsanweisung Seite 44